Oakville · Greater Toronto Area
A coated floor shields your concrete from salt, moisture and wear, and pays you back every time you open the door. Metallic, flake and polyaspartic, poured by hand across the GTA.
Three systems. Each one matched to your space, your lighting and how hard you'll be on it.
SignatureLayered pigments worked by hand for depth, movement and a mirror gloss. No two floors come out the same.
Garages · basements · showrooms · commercial interiors
More on metallic epoxy →
GripA full flake broadcast for a textured, slip-resistant floor that shrugs off traffic, moisture and daily wear.
Garages · utility rooms · commercial spaces
More on flake systems →
ArmourSeals and strengthens concrete against moisture, chemicals and abrasion, in a clean solid colour that wipes down fast.
Workshops · warehouses · high-use concrete
More on solid polyaspartic →Real floors, poured by us. Swipe through, or tap a finish to filter.
New floors go up on Instagram first. Follow @melly.resin →
Before and after
Project Nightfall. Ground back to bare concrete, then finished in a full flake system with coated steps and a matching cove base up the walls.
Drag the line across the photo to compare.
Thirty seconds. Pick the space and the finish, add a few photos of the floor, and we will come back to you with a price.
Your floor
About 450 sq ft of metallic epoxy
Add photos and your number and we will send you a price.
Most coating failures come from skipped prep. It's the part we spend the most time on.
We check the concrete, measure up and talk finishes and colours. You get a written price.
The slab is ground back to clean concrete and repaired, cracks and pits included, so the coating bonds properly.
Base, design layer and protective topcoat. Your quote includes a day-by-day schedule for your system.
We tell you exactly when it is ready to walk and park on, then walk the floor with you and cover care.
About Melly Resin
We're an Oakville concrete coating crew working across the Greater Toronto Area. High-end metallic epoxy, custom resin finishes and tough protective coatings for homes and businesses.
Every floor is priced on three things: the system you pick, the size of the space and the state of the concrete. The on-site quote is free, and you get the price in writing before any work starts.
It depends on the system and the size of the space. Your quote comes with a schedule covering prep, coating and cure, including when you can walk on it and when you can park on it.
That is what it is built for. Our coatings seal the concrete against moisture, chemicals and abrasion, which is exactly what a GTA winter throws at a garage. Tell us how you use the space and we will recommend the right system.
Usually, yes. Cracks and pitting get repaired during prep, before any coating goes down. We check the slab at the quote visit and tell you straight if anything needs fixing first.
We're based in Oakville and work across the Greater Toronto Area, on homes and businesses alike. Not sure if you're in range? Call or send the form and we'll tell you.
Tell us about the space and we'll get back to you to book a free site visit. Photos of the floor help a lot.
